Topics in Category: Final Cut Pro 7 (FCP7) - FCP.co Forum https://mail.fcp.co Tue, 26 Jan 2021 06:41:27 +0000 Joomla! - Open Source Content Management /media/kunena/images/icons/rss.png Topics in Category: Final Cut Pro 7 (FCP7) - FCP.co Forum en-gb FCP7 glitches/dropped frames on exported files - by: peteramwiggins https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/34567-fcp7-glitches-dropped-frames-on-exported-files#111234 https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/34567-fcp7-glitches-dropped-frames-on-exported-files#111234 Final Cut Pro 7 (FCP7) Fri, 04 Dec 2020 01:15:15 +0000 Help with FCP7 GoPro Hero 8 Looking for a WORKFLOW - by: GBALL https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/34089-help-with-fcp7-gopro-hero-8-looking-for-a-workflow#109948 https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/34089-help-with-fcp7-gopro-hero-8-looking-for-a-workflow#109948 uses Apple Compressor, MPEG Streamclip (download free off the GoPro website, per the GoPro tutorial below)

I will check back in and update as I figure it out pro or con



Edit 4k Resolution in Final Cut Pro 7, GoPro Footage]]>
Final Cut Pro 7 (FCP7) Wed, 09 Sep 2020 21:23:22 +0000
FCP crashes instantly when changing AJA IO hd output from 720 to 1080 - by: Teejaye https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/33107-fcp-crashes-instantly-when-changing-aja-io-hd-output-from-720-to-1080#107619 https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/33107-fcp-crashes-instantly-when-changing-aja-io-hd-output-from-720-to-1080#107619
Yes I'm old school but I have a few small projects that are on FCP 7. I bought an AJA IO hd to output sdi to an older JVC pro monitor that is still in the post. I also want to connect a hdmi TV so I'm testing the setup currently with the HDMI tv.

The Mac pro I have is a 1,1 machine running Lion. The aja IO hd is running the latest software and firmware.

All works fine with 1920x1080 apple pro res proxy footage on a timeline that is set to the same as the footage. I set the AJA IO hd in the fcp output settings to AJA Pro res 720 and all fine on the hdmi monitor.

When I switch it to output 1080 to view the footage at its native resolution the FCP almost instantly crashes. Does anyone have any theories on how to fix this?

Thanks]]>
Final Cut Pro 7 (FCP7) Tue, 02 Jun 2020 17:42:51 +0000
Convert FCP7 project to XML please? - by: jonathanrichards https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/33064-convert-fcp7-project-to-xml-please#107492 https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/33064-convert-fcp7-project-to-xml-please#107492
Is there anyone on this forum who could possibly convert an old FCP7 project into an XML please?

It's for a charity here in the UK that are having an anniversary event online and they have requested some edits to their old film for the 'event'.

Is there anyone out there who could do that for me please??

Jonathan Richards]]>
Final Cut Pro 7 (FCP7) Wed, 27 May 2020 10:37:57 +0000
Lacie Little Big Disk 1TB - Disk Utiltiy - by: arc https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/32053-lacie-little-big-disk-1tb-disk-utiltiy#104963 https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/32053-lacie-little-big-disk-1tb-disk-utiltiy#104963
https://youtu.be/Duf0kNi0Hos ]]>
Final Cut Pro 7 (FCP7) Wed, 26 Feb 2020 15:48:55 +0000
Blu-Ray Player Software for Mac - by: VTCmedia https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/32058-blu-ray-player-software-for-mac#104961 https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/32058-blu-ray-player-software-for-mac#104961
Either drag the BDMV package to the window or do SHOW PACKAGE CONTENTS then drag the STREAM folder (or the .m2ts file) to the window.]]>
Final Cut Pro 7 (FCP7) Wed, 26 Feb 2020 14:42:52 +0000
How do I disable these RED tabs - by: jeb0007 https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/31479-how-do-i-disable-these-red-tabs#104743 https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/31479-how-do-i-disable-these-red-tabs#104743
Have not found the right switch in the Prefs to turn it off. but I guess can live with it.

Thanks again

Regards........]]>
Final Cut Pro 7 (FCP7) Wed, 19 Feb 2020 08:35:43 +0000
final cut pro 7 helo - by: X-BlazeYT https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/31513-final-cut-pro-7-helo#103804 https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/31513-final-cut-pro-7-helo#103804



mac specs

macbook4.1

osx 10,7,5
ram 2gb
160gb hdd]]>
Final Cut Pro 7 (FCP7) Wed, 08 Jan 2020 23:56:39 +0000
Old Ripple Training Tutorial DVDs Wanted - by: bojones https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/31391-old-ripple-training-tutorial-dvds-wanted#103572 https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/31391-old-ripple-training-tutorial-dvds-wanted#103572
If anyone out there still has the following out of print tutorial discs and would be willing to part with them for some $ I would be very grateful! I could send the $ through PayPal.

(I contacted Ripple Training to see if they could hook me up with them, but no dice.)

Final Cut Pro 7 Core Training



Final Cut Pro: Advanced Techniques



Sound Editing & Mastering in Soundtrack Pro



I've seen the last one available on Amazon, but they wouldn't ship to Canada.

Here's hoping...]]>
Final Cut Pro 7 (FCP7) Fri, 27 Dec 2019 19:31:53 +0000
FCP 7 - Gaussian Blur Background - by: van Vuuren https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/30773-fcp-7-gaussian-blur-background#102280 https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/30773-fcp-7-gaussian-blur-background#102280
Anybody got tutorial or video on How to Blur the Background of a talking head? Do you even get decent results when you attempt this in FCP 7? I'm not a Motion expert.

Thanks!

Jake]]>
Final Cut Pro 7 (FCP7) Sat, 26 Oct 2019 20:52:37 +0000
Project suddenly shows Out of Memory, Dropped Frames, Playback Trouble - by: phenomenalworld https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/29313-project-suddenly-shows-out-of-memory-dropped-frames-playback-trouble#102243 https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/29313-project-suddenly-shows-out-of-memory-dropped-frames-playback-trouble#102243 Final Cut Pro 7 (FCP7) Thu, 24 Oct 2019 19:58:33 +0000 Recovering lost library?? Please help! - by: brema169 https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/30582-recovering-lost-library-please-help#101807 https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/30582-recovering-lost-library-please-help#101807
I've been working on a film for the last two years and have recently had a massive set back! Both my main external hard drive and the backup hard drive failed, resulting in me losing most of my work. I still have all of the original footage, but the final cut library has gone. I found a folder of autosaved final cut backups on my computer, and I was wondering if there is a way that I can use this with the original media to piece my film back together? At the moment when I open up the backup file it says that the library can not be found as it is no longer "in its original location" (since it has been lost). Any advice would be hugely appreciated!!

Thanks!]]>
Final Cut Pro 7 (FCP7) Sat, 05 Oct 2019 22:44:37 +0000
Where to still find 7.0.3 update? - by: butterflytones@hotmail.com https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/17416-where-to-still-find-7-0-3-update#101332 https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/17416-where-to-still-find-7-0-3-update#101332 Final Cut Pro 7 (FCP7) Sun, 08 Sep 2019 18:00:47 +0000 Final Cut Pro X Pro Workflow JUST released - by: BeJimmiedal https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/30341-final-cut-pro-x-pro-workflow-just-released#101246 https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/30341-final-cut-pro-x-pro-workflow-just-released#101246
Can you explain me the best workflow to import from Xh-A1 to Final Cut Pro 6.

Which is the best format to work on editing. How can you convert the imported footage?

Thanks]]>
Final Cut Pro 7 (FCP7) Tue, 03 Sep 2019 17:15:55 +0000
Last working macOS version for Final Cut Studio (2009) on a virtual machine? - by: MichaelCudge https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/28813-last-working-macos-version-for-final-cut-studio-2009-on-a-virtual-machine#100955 https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/28813-last-working-macos-version-for-final-cut-studio-2009-on-a-virtual-machine#100955
Any thoughts appreciated]]>
Final Cut Pro 7 (FCP7) Sun, 18 Aug 2019 05:30:40 +0000
Sound Track Pro - by: BBDecker https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/29745-sound-track-pro#99931 https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/29745-sound-track-pro#99931 I've double clicked on STP tracks which opens a new editor window for that track. The changes I make (fx also) work but
HOW TO APPLY THE CHANGES TO THE TIME-LINE AND MIX?
Thank-you for any responses!]]>
Final Cut Pro 7 (FCP7) Sat, 11 May 2019 20:33:20 +0000
DSLR, MPEG4 codec/compression - by: BBDecker https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/29694-dslr-mpeg4-codec-compression#99795 https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/29694-dslr-mpeg4-codec-compression#99795 I'm using FCP 7.0.3--Editing footage shot on a DSLR. MPEG4 files, 1920x1080, Codec: H264, AAC
Ran into a snag-VIEWER got really choppy and and then I lost access to the CANVAS and TIMELINE.
New to using the DSLR. Is this a codec/compression problem?
What is the right setting and how does one convert the files?
Thank-you for any details!
BBD]]>
Final Cut Pro 7 (FCP7) Thu, 25 Apr 2019 03:44:40 +0000
Sequence Lost, Please Help! - by: crasszorro https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/29620-sequence-lost-please-help#99458 https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/29620-sequence-lost-please-help#99458
Thank you in advance for whatever advice you can give me. While working on a film in FCP7, solely confined to one sequence folder, a multitude of sequence folders were produced; sort of a splintering of the one sequence I initially worked in. I ignored this clutter and continued building my movie in this one sequence. However, the program unexpectedly closed and I was forced to reopen FCP7. Upon doing so, all of the sequences were closed and I had to search for the sequence in my Finder under Autocache Vaults. There were many sequences with different dates and codes on them and my search became more exasperated. Once, I came across a sequence that was close to the final sequence I had saved, but not quite. As each day goes by and I attempt to open these sequences, more sequences are produced in the Autocache Vault. How do I find my last saved sequence, the one which contains the most current work I've done and end this cycle? Thank you!]]>
Final Cut Pro 7 (FCP7) Wed, 27 Mar 2019 20:52:22 +0000
Zoom settings - by: dt53 https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/29533-zoom-settings#99127 https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/29533-zoom-settings#99127 Final Cut Pro 7 (FCP7) Sun, 03 Mar 2019 21:54:20 +0000 Render problem? - by: paolo.drusi https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/28653-render-problem#94315 https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/28653-render-problem#94315
I've always FCP7 for years to produce my videos but lately I get this (see image- red patches) on the timeline after rendering and on the exported file. This happens when I use the ColourCorrection filter.

Thank you.]]>
Final Cut Pro 7 (FCP7) Sat, 24 Feb 2018 16:57:48 +0000
Jutters in footage when moving from on-screen text to video - by: yolatechno https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/28638-jutters-in-footage-when-moving-from-on-screen-text-to-video#94248 https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/28638-jutters-in-footage-when-moving-from-on-screen-text-to-video#94248
I'm creating a video that combines a talk ing heads interview with on screen-text. The text appears sporadically and then goes back to the talking head.

I have the text on a colour matte , and it fades out. The text fades first, and then the matte fades on top of the video. The problem is that at teh very end of the fade, the video jutters as it comes back in.

The formats all seem to match - square pixels. Anyone know what this issue is? I get the feeling that it's a common one.]]>
Final Cut Pro 7 (FCP7) Tue, 20 Feb 2018 16:48:03 +0000
No video playback on extrenal monitor - by: adrian.peek https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/28634-no-video-playback-on-extrenal-monitor#94236 https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/28634-no-video-playback-on-extrenal-monitor#94236 Final Cut Pro 7 (FCP7) Tue, 20 Feb 2018 01:50:11 +0000 Audio EQ does not seem to work as I think it should - by: jeb0007 https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/28604-audio-eq-does-not-seem-to-work-as-i-think-it-should#94218 https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/28604-audio-eq-does-not-seem-to-work-as-i-think-it-should#94218
I guess there is no easy solution so will have to grim and bear it.

Regards
I am not sure what the name of the device is but it is a Hand Held Stereo Professional device which he uses for interviews. As far as I am aware it records @ 48000.

I guess there is no easy solution so will have to grim and bear it.

Regards]]>
Final Cut Pro 7 (FCP7) Mon, 19 Feb 2018 09:30:41 +0000
color correction - by: Ben Balser https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/28110-color-correction#94131 https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/28110-color-correction#94131 Final Cut Pro 7 (FCP7) Wed, 14 Feb 2018 13:22:03 +0000 Log and Capture HDV tapes issue - by: Ben Balser https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/28479-log-and-capture-hdv-tapes-issue#94130 https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/28479-log-and-capture-hdv-tapes-issue#94130 Final Cut Pro 7 (FCP7) Wed, 14 Feb 2018 13:21:36 +0000 final cut pro 7 - by: Algis https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/28269-final-cut-pro-7#92150 https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/28269-final-cut-pro-7#92150 Final Cut Pro 7 (FCP7) Fri, 08 Dec 2017 05:59:23 +0000 DVCPRO FCP7 sound issue - by: FranMan https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/28002-dvcpro-fcp7-sound-issue#90931 https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/28002-dvcpro-fcp7-sound-issue#90931 I have recently received a new Panasonic PX800G Camera.
I am required to Shoot and edit in DVCPRO. I edit on FCP 7 with the output going through a DVCPRO tape deck via fire wire. I can capture the footage just fine and it works in FCP. But the moment it goes through the deck you can no longer hear the audio on the time line or the bin. However if you scrub threw the clip quickly you can hear that the audio is present. This problem is not happening with any of our other cameras (one is a year and a half old) any advice would be greatly appreciated.]]>
Final Cut Pro 7 (FCP7) Tue, 03 Oct 2017 09:02:10 +0000
Replacement for DVDSP? - by: bradywurtz https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/27937-replacement-for-dvdsp#90551 https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/27937-replacement-for-dvdsp#90551
and i usually export to compressor and make my .ac3 and .m4v files so I can manually make sure the file size is perfect for what i'm doing. I usually have about three different vidoes going onto the DVD, and i like to make sure they'll all fit just fine, with some videos having better quality than another video.]]>
Final Cut Pro 7 (FCP7) Thu, 14 Sep 2017 17:22:01 +0000
Editing Multiple Videos for Live Video Mapping (Final Cut Pro 6) - by: Tampl https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/25505-editing-multiple-videos-for-live-video-mapping-final-cut-pro-6#89674 https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/25505-editing-multiple-videos-for-live-video-mapping-final-cut-pro-6#89674 video mapping toolkits ! Also they have a lot of tutorials!]]> Final Cut Pro 7 (FCP7) Wed, 02 Aug 2017 05:25:40 +0000 Can't find a template for HD 1280x720p MOV - by: jeb0007 https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/27532-can-t-find-a-template-for-hd-1280x720p-mov#88860 https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/27532-can-t-find-a-template-for-hd-1280x720p-mov#88860 Final Cut Pro 7 (FCP7) Mon, 19 Jun 2017 11:49:00 +0000 help! crop-motion looks terrible after export! - by: Nvilchez https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/27496-help-crop-motion-looks-terrible-after-export#88392 https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/27496-help-crop-motion-looks-terrible-after-export#88392
The material was shot on a Canon 550, the material itself shouldnt need de-interlacing.]]>
Final Cut Pro 7 (FCP7) Sun, 28 May 2017 11:01:08 +0000
Best Pproject settings for 1280x720p mov - by: jeb0007 https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/27459-best-pproject-settings-for-1280x720p-mov#88236 https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/27459-best-pproject-settings-for-1280x720p-mov#88236
I would be grateful if someone can give me guidance on the correct Project and Sequence setting for this type of file.
The media info of the file is:-
Format : MPEG-4
Format profile : QuickTime
Codec ID : qt 2007.09 (qt /CAEP)
File size : 60.8 MiB
Duration : 21s 421ms
Overall bit rate : 23.8 Mbps
Encoded date : UTC 2017-05-12 15:18:45
Tagged date : UTC 2017-05-12 15:18:45

Video
ID : 1
Format : AVC
Format/Info : Advanced Video Codec
Format profile : This email address is being protected from spambots. You need JavaScript enabled to view it.
Format settings, CABAC : No
Format settings, ReFrames : 1 frame
Format settings, GOP : M=1, N=15
Codec ID : avc1
Codec ID/Info : Advanced Video Coding
Duration : 21s 421ms
Bit rate : 23.1 Mbps
Width : 1 280 pixels
Height : 720 pixels
Display aspect ratio : 16:9
Frame rate mode : Constant
Frame rate : 29.970 (30000/1001) fps
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Progressive
Bits/(Pixel*Frame) : 0.835
Stream size : 58.9 MiB (97%)
Language : English
Encoded date : UTC 2017-05-12 15:18:45
Tagged date : UTC 2017-05-12 15:18:45
Color range : Full
Color primaries : BT.709
Transfer characteristics : BT.709
Matrix coefficients : BT.601

Audio
ID : 2
Format : PCM
Format settings, Endianness : Little
Format settings, Sign : Signed
Codec ID : sowt
Duration : 21s 421ms
Bit rate mode : Constant
Bit rate : 768 Kbps
Channel(s) : 1 channel
Channel positions : Front: C
Sampling rate : 48.0 KHz
Bit depth : 16 bits
Stream size : 1.96 MiB (3%)
Language : English
Encoded date : UTC 2017-05-12 15:18:45
Tagged date : UTC 2017-05-12 15:18:45

Hope this info will help

Thanks for looking....]]>
Final Cut Pro 7 (FCP7) Mon, 22 May 2017 14:44:45 +0000
FCP7 Not outputting moving video via canopus box - by: jeb0007 https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/27457-fcp7-not-outputting-moving-video-via-canopus-box#88231 https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/27457-fcp7-not-outputting-moving-video-via-canopus-box#88231
The problem I have it that I am trying to Edit a 1280x720p .mov file taken from a canon camera
There does not seem to be a default template for this and I have tried to edit various ones ( HD ) but always the end result is that the video will play on the timeline but the output via Firewire to the Canopus box OR selecting to preview full screen on the second monitor results in a frozen still image. If I move the Play head the image does not move until I stop the play head and the that last image will appear.

This is the Media info of that MOV file
General
Complete name : C:\Users\ashva\Desktop\fred capture\MVI_4577.MOV
Format : MPEG-4
Format profile : QuickTime
Codec ID : qt 2007.09 (qt /CAEP)
File size : 60.8 MiB
Duration : 21s 421ms
Overall bit rate : 23.8 Mbps
Encoded date : UTC 2017-05-12 15:18:45
Tagged date : UTC 2017-05-12 15:18:45

Video
ID : 1
Format : AVC
Format/Info : Advanced Video Codec
Format profile : This email address is being protected from spambots. You need JavaScript enabled to view it.
Format settings, CABAC : No
Format settings, ReFrames : 1 frame
Format settings, GOP : M=1, N=15
Codec ID : avc1
Codec ID/Info : Advanced Video Coding
Duration : 21s 421ms
Bit rate : 23.1 Mbps
Width : 1 280 pixels
Height : 720 pixels
Display aspect ratio : 16:9
Frame rate mode : Constant
Frame rate : 29.970 (30000/1001) fps
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Progressive
Bits/(Pixel*Frame) : 0.835
Stream size : 58.9 MiB (97%)
Language : English
Encoded date : UTC 2017-05-12 15:18:45
Tagged date : UTC 2017-05-12 15:18:45
Color range : Full
Color primaries : BT.709
Transfer characteristics : BT.709
Matrix coefficients : BT.601

Audio
ID : 2
Format : PCM
Format settings, Endianness : Little
Format settings, Sign : Signed
Codec ID : sowt
Duration : 21s 421ms
Bit rate mode : Constant
Bit rate : 768 Kbps
Channel(s) : 1 channel
Channel positions : Front: C
Sampling rate : 48.0 KHz
Bit depth : 16 bits
Stream size : 1.96 MiB (3%)
Language : English
Encoded date : UTC 2017-05-12 15:18:45
Tagged date : UTC 2017-05-12 15:18:45

If you can give any guidance as to what template to adjust I would be very grateful

Thanks]]>
Final Cut Pro 7 (FCP7) Mon, 22 May 2017 07:48:50 +0000
FCP7 Editing 4K in smaller resolution and conforming it later. - by: whitemax https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/23173-fcp7-editing-4k-in-smaller-resolution-and-conforming-it-later?start=20#83977 https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/23173-fcp7-editing-4k-in-smaller-resolution-and-conforming-it-later?start=20#83977 The following Mac computers are capable of viewing 4K resolution via HDMI from Final Cut Pro X 10.1.
Mac Pro (Late 2013)
MacBook Pro (Retina, Late 2013 and later)
The supported 4K resolutions are as follows. Note that not every 4K monitor will support both of these resolutions, and 4096 x 2160 is only supported via HDMI at 24fps.
4096 x 2160
3840 x 2160]]>
Final Cut Pro 7 (FCP7) Wed, 14 Dec 2016 09:24:40 +0000
Exporting issues - by: daheck91 https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/26460-exporting-issues#83144 https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/26460-exporting-issues#83144
Anyone have any suggestions to make image + wireframe hold its position? Like I said, I never had this problem before. This was my first project in 1080p HD. Maybe I'm formatting something wrong?

Thanks in advance!]]>
Final Cut Pro 7 (FCP7) Wed, 23 Nov 2016 08:57:27 +0000
New user, settings for importing a ripped non-commercial DVD to FCP7 - by: GeneMacMan https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/26122-new-user-settings-for-importing-a-ripped-non-commercial-dvd-to-fcp7#81045 https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/26122-new-user-settings-for-importing-a-ripped-non-commercial-dvd-to-fcp7#81045
I was going to attempt to use FCP7 to edit down 2 ripped DVD-Rs (it's 2 VIDEO_TS folders of the .VOB files) of a 2-and-a-half-hour videotaped courtroom deposition that a pal from a law firm gave to me.

I've never used FCP7 much (I generally use Avid, but I have a 30-day trial version, it's possible the trial/additional edits may go past the 30 days, and I figure this is a good excuse to learn FCP7), and although I've ripped plenty of DVDs in the past, and converted them into single file Quicktime, MP4, MKV etc files for personal viewing on an iPad or what not (I generally use Handbrake or iSkysoft), I've never had to edit them afterwards, much less used FCP7 for the job (I did this before for the same friend, but it was using Avid, and the video was already converted into a Quicktime for easier import).

That said, what program & export settings (and FCP7 import settings) would you advise using?

The ripped DVD specs are both:
video:
720 x 480 size
4 x 3 aspect ratio
NTSC format, Standard Definition

audio:
format: Dolby
channels: 2

There's timecode burnt into the DVD video.

I may be overthinking things, but I've heard a lot about the Apple Intermediate Codec/ProRes codecs. Fortunately, since the final edit isn't going to be for broadcast or anything like that, I don't have any strict guidelines as far as how the finished video resolution is going to look, however, I don't want it to look awful, or have the frame rate be off.

Please help!]]>
Final Cut Pro 7 (FCP7) Fri, 21 Oct 2016 06:12:02 +0000
Is it possible to edit 48FPS in FCP7? - by: JPM Editor https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/25758-is-it-possible-to-edit-48fps-in-fcp7#80713 https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/25758-is-it-possible-to-edit-48fps-in-fcp7#80713

MarkNelsonMovies wrote: what specific reason do you have for not using FCPX?


I'm afraid you can't work at 48 FPS in Final Cut Pro X either. There isn't a preset for it and unfortunately we can't choose a custom frame rate at the moment (only spatial resolution is customizable)

You could work in a 24 FPS timeline and conform the 48 FPS original footage to 24 FPS using "Automatic Speed" for nice slow motion. For an FCP7 workflow, you would have to use Cinema Tools to conform your footage before ingest.

But if that's not what you want and you need to deliver a 48 FPS master, you don't have many options... I know the latest version of Avid Media Composer supports it. But Premiere Pro CC and FCP 7-X don't have support for this at the moment.

Good luck!

Jesús
@jesus_edits]]>
Final Cut Pro 7 (FCP7) Thu, 13 Oct 2016 10:05:00 +0000
Correct workflow between Mpeg Streamclip and FCP 7 to convert and edit videos from iPhone 5c - by: MsJustine https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/25893-correct-workflow-between-mpeg-streamclip-and-fcp-7-to-convert-and-edit-videos-from-iphone-5c#80708 https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/25893-correct-workflow-between-mpeg-streamclip-and-fcp-7-to-convert-and-edit-videos-from-iphone-5c#80708 Final Cut Pro 7 (FCP7) Thu, 13 Oct 2016 06:19:51 +0000 encoded pixels 720 x 576 to display at 1025 x 576 - by: bogiesan https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/26059-encoded-pixels-720-x-576-to-display-at-1025-x-576#80700 https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/26059-encoded-pixels-720-x-576-to-display-at-1025-x-576#80700
That answers your question but that may not be what your'e really asking. Why do you want do this and why aren't you just using the simple and direct solution?]]>
Final Cut Pro 7 (FCP7) Wed, 12 Oct 2016 13:35:28 +0000
FCP 7 on Sierra - by: EditorGuy https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/25998-fcp-7-on-sierra#80662 https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/25998-fcp-7-on-sierra#80662 Final Cut Pro 7 (FCP7) Tue, 11 Oct 2016 17:27:14 +0000 AVCHD file space after log and transfer - by: EditorGuy https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/26041-avchd-file-space-after-log-and-transfer#80661 https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/26041-avchd-file-space-after-log-and-transfer#80661 Final Cut Pro 7 (FCP7) Tue, 11 Oct 2016 17:26:28 +0000 Export Problem FCP 7.0.3 / Color - by: DmitriZigany https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/25881-export-problem-fcp-7-0-3-color#79521 https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/25881-export-problem-fcp-7-0-3-color#79521
I haven't used FCP7 in years and never used it too much, but asking for a friend, she explains her problem:

"I have a problem Exporting from FCP to QT without losing the color correction that is done. Most of the color correcting is done in Colours, and I've never had this problem before. Everything else except this is working well. I've tried lots of different things but can't figure this out. I'll be greatful for any advices!"

So in short, colour corrections done in both FCP and Color are not exported...

She's using FCP 7.0.3 and Color and an iMac 27inch Late 2012 with OSX El Capitan, 3,2 GHz Intel Core i5, memory 8 GB 1600 MHz DDR3.

She has QuickTime 10.4... Does FCP 7 / Color need QT7 to work?]]>
Final Cut Pro 7 (FCP7) Tue, 30 Aug 2016 17:32:21 +0000
Importing XML files created in Prelude into FCP7 - by: char https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/25719-importing-xml-files-created-in-prelude-into-fcp7#78729 https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/25719-importing-xml-files-created-in-prelude-into-fcp7#78729 The whole of the media can be opened minus the subclips.

anyone had this (or similar) problems..?]]>
Final Cut Pro 7 (FCP7) Tue, 19 Jul 2016 15:23:38 +0000
Audio Sync Help - by: BenB https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/25697-audio-sync-help#78665 https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/25697-audio-sync-help#78665 Final Cut Pro 7 (FCP7) Sat, 16 Jul 2016 16:12:27 +0000 Log and Capture shut down and cannot play the mov file. - by: gin.choi https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/25685-log-and-capture-shut-down-and-cannot-play-the-mov-file#78609 https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/25685-log-and-capture-shut-down-and-cannot-play-the-mov-file#78609 The codec is DVCPRO 1080i 29.97 fps.]]> Final Cut Pro 7 (FCP7) Thu, 14 Jul 2016 12:10:56 +0000 FCP 4 'General Error' - by: michael.zheng https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/25688-fcp-4-general-error#78548 https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/25688-fcp-4-general-error#78548
I'm new to this forum. I have been using FCP 4 for simple video editing. Recently I received a file from a friend in GErmany (MVI_8898.mov), most probably shot in HD in PAL format. When I tried to 'import' it into FCP 4, I got a 'General Error.'

I tried shooting a HD video with my own Canon 5D (NTSC) and generate a file called MVI_8144.mov. I could import it into FCP 4 without a problem.

I cannot figure out why FCP 4 can't import the file from Germany. I'd appreciate any insight into this matter from this group. I'm including two screenshots of the attributes of these two video files as displayed by Quicktime 7.0's Inspector.

Thanks so much in advacne!
michael]]>
Final Cut Pro 7 (FCP7) Wed, 13 Jul 2016 06:40:40 +0000
Not found - error: out of memory - by: junkyard.willie https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/25676-not-found-error-out-of-memory#78503 https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/25676-not-found-error-out-of-memory#78503 Tools > Render manager > check off files then delete.
Drives actually don't go bad from just sitting in storage.]]>
Final Cut Pro 7 (FCP7) Sat, 09 Jul 2016 19:05:37 +0000
Help for the rookie - by: MsJustine https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/25619-help-for-the-rookie#78501 https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/25619-help-for-the-rookie#78501
I would suggest upgrading to Final Cut Pro X, the headaches of FCP7, also known in the trade as classic FCP, the inability of 7 to handle modern codecs, even on a top of the range Mac Pro, with 32GB RAM, there is simply no question, forget FCP7, it never existed, lets pretend it did not, it was maybe suitable, Apple never updated as it should, left it laggy, error prone.

The Extreme engine profiler is a joke, it is a 32bit application, trying to run on a 64bit operating system, it is just never going to be a pleasant experience, you will only get frustrated, annoyed, many other negative connotations!

Many here, that once knew 7, then updated to X, we have forgotten what we knew about 7, there is simply nothing positive to say about classic, aka Final Cut Pro 7.

The features of X, simply for a couple hundred US $, is so worth the investment, buy the official Brendan Boykin Final Cut Pro X for 10.2, go through the book, watch Ripple Training on Youtube, I used both to pass the exam.

I would suggest leaving 7 in the past, where the past belongs!!]]>
Final Cut Pro 7 (FCP7) Sat, 09 Jul 2016 15:27:48 +0000
EXPORTING APPLEPRORESS TO A LESS HEAVY FORMAT - by: BenB https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/25664-exporting-appleproress-to-a-less-heavy-format#78498 https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/25664-exporting-appleproress-to-a-less-heavy-format#78498 ProRes will make much larger files, that is an issue. If you don't have the storage space, stick with native H.264.
Again, only convert to ProRes "ONLY IF" you are having issues with performance editing H.264.]]>
Final Cut Pro 7 (FCP7) Sat, 09 Jul 2016 13:16:29 +0000
timeline in clip - by: BenB https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/25556-timeline-in-clip#77771 https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/25556-timeline-in-clip#77771 You could place a rectangle, and keyframe a mask over it to reveal it as it goes.
This would be a snap in FCPX, but you an do it in 7 with a little work.
Or make it in Motion to look as fancy as you want. Start with empty bar, end with full bar, export a QT movie file. Then in FCP 7, retime it (slow it down or speed it up) to match the duration of the clip.]]>
Final Cut Pro 7 (FCP7) Mon, 13 Jun 2016 12:11:59 +0000
FCP7 best export settings, format & codec suggestion - by: basilt https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/25515-fcp7-best-export-settings-format-codec-suggestion#77456 https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/25515-fcp7-best-export-settings-format-codec-suggestion#77456
I write to the forum to ask you some questions on codecs, compression types
for small video i made using canon 600d and shot with built-in mic, 25fps, 1920x1080p

After i converted the MOV files to proress (choice listing proress only without i.e. LT) with mpegstreamclip, and moved the clips on timeline, set for proress codec, i made a 15min approx. video and want to export it in the Smallest possible filesize and in very good quality for Ytube first.

When exporting from FCP, i use QT conversion, Apple intermediate codec and export.
File is about 11GB in size, huge ! Then i convert to 720p with mpegstreamclip because i dont know
how to shrink it properly and i get a 500MB file using h264, AAC sound and fast start.

I am not sure if 11GB should be that big, but i have seen movies claiming sizes i.e.150MB and very crisp almost uncompressed quality for Ytube, and i wonder if you can help me pick up right choices to export a small file size for a start and also in full HD.

When i play my file, i have some dark areas, i.e. swarm of bees hanging on a tree branch, which i want details Not to get very compressed, as i see no bees, just artifacts, and i was wondering also if there is a way to tell FCP or mpstreamclip, not to compress specific frames on my video etc.

any help on the above will be appreciated
Thanks]]>
Final Cut Pro 7 (FCP7) Sat, 04 Jun 2016 18:05:27 +0000
Will FCP 6 run on Mountain Lion? - by: simspace https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/25229-will-fcp-6-run-on-mountain-lion#77388 https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/25229-will-fcp-6-run-on-mountain-lion#77388 Final Cut Pro 7 (FCP7) Thu, 02 Jun 2016 16:40:15 +0000 What Mac Pro work with FCP 7? - by: golem99 https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/25469-what-mac-pro-work-with-fcp-7#77231 https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/25469-what-mac-pro-work-with-fcp-7#77231
You are right, everybody should move on. This will be the last project
using FCP 7 at this TV-station (they are currently changing everything to
Premiere...) Still, I need this to work properly. Thank you for your time
and effort"


Steve Ericsson
Stockholm, Sweden]]>
Final Cut Pro 7 (FCP7) Sun, 29 May 2016 07:26:43 +0000
FCP7 will not recognize my SD card - by: pascale.thomas https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/25456-fcp7-will-not-recognize-my-sd-card#77026 https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/25456-fcp7-will-not-recognize-my-sd-card#77026
Any help is greatly appreciated.]]>
Final Cut Pro 7 (FCP7) Sun, 22 May 2016 20:21:25 +0000
What's the best way to make a sill image from a movie file? I need it high quality - by: oxband https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/25047-what-s-the-best-way-to-make-a-sill-image-from-a-movie-file-i-need-it-high-quality#74025 https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/25047-what-s-the-best-way-to-make-a-sill-image-from-a-movie-file-i-need-it-high-quality#74025

What's the best way to make stills from a movie file?]]>
Final Cut Pro 7 (FCP7) Thu, 03 Mar 2016 22:29:24 +0000
Does Final Cut Pro 7 would run on the New Mac Mini? - by: Alis_ https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/25026-does-final-cut-pro-7-would-run-on-the-new-mac-mini#73914 https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/25026-does-final-cut-pro-7-would-run-on-the-new-mac-mini#73914 ]]> Final Cut Pro 7 (FCP7) Tue, 01 Mar 2016 15:12:04 +0000 DVD studio pro works in simulator and menu works in burned dvd - by: thewalrusriggs https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/24973-dvd-studio-pro-works-in-simulator-and-menu-works-in-burned-dvd#73640 https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/24973-dvd-studio-pro-works-in-simulator-and-menu-works-in-burned-dvd#73640
Any help would be very much appreciated. Here is the build log...

Building Project CI DVD

2/19/16 1:35:10 PM

Build Folder /Volumes/1TB USB/Jim Norton/Contextually Inadequate/DVD/DVD4 BUILD

Starting DVD Build CI_DVD...

Compiler Initializing...

Precompiling Project CI_DVD

Compiling VMG Information...

Created 8 PGCs in VTSM1

Created 5 PGCs in VTSM2

Created 8 PGCs in VMG.

2 Menu(s) will be created...

Compiling Menu PGCs...

Compiling Menu#1 (Menu 1)...

Compiling Menu#2 (Menu 2)...

Writing VIDEO_TS.VOB

Compiling Menu PGCs...

Writing VTS_02_0.VOB

2 VTSs and 2 Titles will be created...

Compiling VTS#1 (Track 1)...

Muxing VTS_01_1.VOB

Done.

Compiling VTS#2 (Track 2)...

Writing VTS_02_0.VOB

Muxing VTS_02_1.VOB

Done.

Linking VMG...

Linking VTS#1...

Linking VTS#2...

Writing VTS#1...

Writing VTS#2...

Writing VMG...

Writing Layout Info...

Compile Completed Successfully

Starting DVD Build CI_DVD...

Compiler Initializing...

Precompiling Project CI_DVD

Compiling VMG Information...

Created 8 PGCs in VTSM1

Created 5 PGCs in VTSM2

Created 8 PGCs in VMG.

2 Menu(s) will be created...

Compiling Menu PGCs...

Compiling Menu#1 (Menu 1)...

Compiling Menu#2 (Menu 2)...

Writing VIDEO_TS.VOB

Compiling Menu PGCs...

Writing VTS_02_0.VOB

2 VTSs and 2 Titles will be created...

Compiling VTS#1 (Track 1)...

Muxing VTS_01_1.VOB

Done.

Compiling VTS#2 (Track 2)...

Writing VTS_02_0.VOB

Muxing VTS_02_1.VOB

Done.

Linking VMG...

Linking VTS#1...

Linking VTS#2...

Writing VTS#1...

Writing VTS#2...

Writing VMG...

Writing Layout Info...

Compile Completed Successfully

Note: The file ‘CI_DVD.layout’ found in the ‘VIDEO_TS’ folder is not a DVD-Video file and will not be included in the final disc or DLT.

Note: The file ‘VOB_DATA.LAY’ found in the ‘VIDEO_TS’ folder is not a DVD-Video file and will not be included in the final disc or DLT.

Start formatting

Formatting as Standard DVD

Simulation mode is off

Lossless linking is off

Number of layers is 1

Doing side 1 of 1

Playable in region 1,2,3,4,5,6,8

Disc size is 12 cm

Disc has no copyright material

Writing ISO 9660 directories

Writing UDF 1.02 structures

Writing files

Writing final UDF information

Formatting finished.]]>
Final Cut Pro 7 (FCP7) Mon, 22 Feb 2016 18:40:33 +0000
clips keep going off line and getting renamed - by: phil.halper https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/24874-clips-keep-going-off-line-and-getting-renamed#73096 https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/24874-clips-keep-going-off-line-and-getting-renamed#73096 Final Cut Pro 7 (FCP7) Mon, 08 Feb 2016 11:30:19 +0000 Settings for importing vision from JVC700 - by: Barryd57 https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/24855-settings-for-importing-vision-from-jvc700#72883 https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/24855-settings-for-importing-vision-from-jvc700#72883 I'm having difficulty in getting my settings right in FCP7 to play & edit vision from my JVC 700 Camera.
I can drop the QT clips into FCP & see it in the viewer but it wont play?
I have been playing around with easy set up etc for hours but going around in circles!
The vision was recorded as QT clips @ 1920 x 1080 50i
Thank you...340]]>
Final Cut Pro 7 (FCP7) Wed, 03 Feb 2016 13:52:34 +0000
Power Mac G4 dual 1.25 w/FW800 - by: DigiGal https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/24603-power-mac-g4-dual-1-25-w-fw800#71672 https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/24603-power-mac-g4-dual-1-25-w-fw800#71672 Final Cut Pro 7 (FCP7) Mon, 21 Dec 2015 22:38:44 +0000 Audio dither???? - by: MCR https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/24269-audio-dither#71617 https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/24269-audio-dither#71617
Can anyone else confirm...]]>
Final Cut Pro 7 (FCP7) Fri, 18 Dec 2015 21:57:31 +0000
How to make sounds occupy different auditory space? - by: BenB https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/24524-how-to-make-sounds-occupy-different-auditory-space#70986 https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/24524-how-to-make-sounds-occupy-different-auditory-space#70986 Final Cut Pro 7 (FCP7) Fri, 27 Nov 2015 14:01:50 +0000 Lumix GH2 footage - dropping frames? Need to match with the audio - by: manoucho https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/24304-lumix-gh2-footage-dropping-frames-need-to-match-with-the-audio#70979 https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/24304-lumix-gh2-footage-dropping-frames-need-to-match-with-the-audio#70979 Final Cut Pro 7 (FCP7) Thu, 26 Nov 2015 23:17:20 +0000 Ntsc Pal Settings Problem - by: manoucho https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/24430-ntsc-pal-settings-problem#70978 https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/24430-ntsc-pal-settings-problem#70978 Final Cut Pro 7 (FCP7) Thu, 26 Nov 2015 23:15:32 +0000 importing super8 to FCP7, help! - by: MarkNelsonMovies https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/24278-importing-super8-to-fcp7-help#69555 https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/24278-importing-super8-to-fcp7-help#69555
Assuming you footage is 1440 x 1080,

if you want to edit 4:3 super8 footage in a 1080p 16:9 timeline without scaling you would have to scan it at a resolution of 1920 x 1440 then you can move it up and down to get the crop you wanted while maintaining pixel level accuracy,

The super8 footage might not be high enough quality for this to mater, as long as the scan has enough resolution to capture all the detail nothing else you do will make a difference.

You could also drop the 1080p footage into a custom 1440 x 810 timeline for a pixel accurate crop.

Hope this helps,
-Mark]]>
Final Cut Pro 7 (FCP7) Fri, 16 Oct 2015 22:16:41 +0000
Setting up my upgraded System for best work on fcp7 - by: Tzwennsen https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/24217-setting-up-my-upgraded-system-for-best-work-on-fcp7#69448 https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/24217-setting-up-my-upgraded-system-for-best-work-on-fcp7#69448 ]]> Final Cut Pro 7 (FCP7) Mon, 12 Oct 2015 17:15:13 +0000 Using FCP 6.0.6 on mac book pro OSX 10.7.5 Dissolves and Titling causing 'jumps' of images - by: kimo https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/24184-using-fcp-6-0-6-on-mac-book-pro-osx-10-7-5-dissolves-and-titling-causing-jumps-of-images#68909 https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/24184-using-fcp-6-0-6-on-mac-book-pro-osx-10-7-5-dissolves-and-titling-causing-jumps-of-images#68909 Clips are a mix of mp4 and .mov files that I'm washing through qt pro so all have same frame rates (25), aspect ratio (16.9), etc with codec as H.264 on hdv 1920 x 1080.
I'm completely lost as to why this is happening. HELP! Thanks :)]]>
Final Cut Pro 7 (FCP7) Thu, 24 Sep 2015 17:19:09 +0000
video playback trouble using pro res 4444 & aja kona LHi - proper settings? - by: BenB https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/23820-video-playback-trouble-using-pro-res-4444-aja-kona-lhi-proper-settings#68527 https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/23820-video-playback-trouble-using-pro-res-4444-aja-kona-lhi-proper-settings#68527 Final Cut Pro 7 (FCP7) Tue, 15 Sep 2015 12:10:37 +0000 Autosave:File error: Unkown file - by: peteramwiggins https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/24032-autosave-file-error-unkown-file#68509 https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/24032-autosave-file-error-unkown-file#68509 Final Cut Pro 7 (FCP7) Tue, 15 Sep 2015 07:43:58 +0000 that damm orange line fcp7 , new ssd card . miracle please - by: Francisco_Saenz https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/24057-that-damm-orange-line-fcp7-new-ssd-card-miracle-please#68088 https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/24057-that-damm-orange-line-fcp7-new-ssd-card-miracle-please#68088 Mac Os 10.6.4
250 SSD drive 3.2 Ghz Intel Core i3
12 GB 1333 MHz DDR3

This is my last fcp7 project , im done with it. I must switch asap to FcpX or Premiere CC.

I just bought a 250 Ssd card for my 2010 Imac.
So I re-installed fcp7.

My sequence and clips are Prores422
My problem is that I cannot run videos fluently because of that damm orange line. I'm trying to to multicam 2 ways. 1 Professional way and one survival/ I do what I can / Guetto way. My clips and scratch come from an external hard drive

1. MULTICAM
These are my settings





Even through low playbacks 3 clips in one multiclip sequence (all in prores) don’t run fluently. And even if I render which takes forever , the moment I make a new cut messes everything up. What can I do , check or change in my settings so I can have peace in my life again?




2. THE GHETTO WAY





Well since I have to do something about this, I decided to put 3 video tracks and make them smaller so I can view the 3 of them and work. But the orange mechanic wants to ruin me so it appears when I make the size of my clip smaller. I think it's normal because I'm changing their normal state but is there a way for me to work with the grey line without having to render. Rendering each sequence takes like 12 hours. Please help me I need to give the product on point I have until Friday . Thanks for your time!]]>
Final Cut Pro 7 (FCP7) Sun, 06 Sep 2015 07:46:05 +0000
That damm orange line! fcp7 , new ssd card . Miracle please - by: Francisco_Saenz https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/24056-that-damm-orange-line-fcp7-new-ssd-card-miracle-please#68087 https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/24056-that-damm-orange-line-fcp7-new-ssd-card-miracle-please#68087 Mac Os 10.6.4
250 SSD drive 3.2 Ghz Intel Core i3
12 GB 1333 MHz DDR3

This is my last fcp7 project , im done with it. I must switch asap to FcpX or Premiere CC.

I just bought a 250 Ssd card for my 2010 Imac.
So I re-installed fcp7.

My sequence and clips are Prores422
My problem is that I cannot run videos fluently because of that damm orange line. I'm trying to to multicam 2 ways. 1 Professional way and one survival/ I do what I can / Guetto way. My clips and scratch come from an external hard drive

1. MULTICAM
These are my settings





Even through low playbacks 3 clips in one multiclip sequence (all in prores) don’t run fluently. And even if I render which takes forever , the moment I make a new cut messes everything up. What can I do , check or change in my settings so I can have peace in my life again?




2. THE GHETTO WAY





Well since I have to do something about this, I decided to put 3 video tracks and make them smaller so I can view the 3 of them and work. But the orange mechanic wants to ruin me so it appears when I make the size of my clip smaller. I think it's normal because I'm changing their normal state but is there a way for me to work with the grey line without having to render. Rendering each sequence takes like 12 hours. Please help me I need to give the product on point I have until Friday . Thanks for your time!]]>
Final Cut Pro 7 (FCP7) Sun, 06 Sep 2015 07:42:35 +0000
Issues with FCP7 and Synology NAS - by: peterr https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/23975-issues-with-fcp7-and-synology-nas#67747 https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/23975-issues-with-fcp7-and-synology-nas#67747
You did understand correctly yes, this Lumaforge NAS looks amazing but I'll try to make what we have work.
I did follow their advice and I managed to make it work with one working station using FCP 7.0.3 connected to the NAS via a NFS connection. I can open FCP7, and open files from the app.
Strangely it doesn't work on an other working station using FCP 7.0.0, I will update and see if it works. This working station has all the same network settings as the first one except for its ip address (which I also allowed in the NFS settings of the shared folder I'm trying to access on the NAS).

Still looking for ideas...

Thanks.]]>
Final Cut Pro 7 (FCP7) Thu, 27 Aug 2015 12:17:38 +0000
FCP 7 Red Diagonal lines issue using Red Giant Denoiser - by: amackenziefilms https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/23928-fcp-7-red-diagonal-lines-issue-using-red-giant-denoiser#67405 https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/23928-fcp-7-red-diagonal-lines-issue-using-red-giant-denoiser#67405 Thanks!!
]]>
Final Cut Pro 7 (FCP7) Thu, 13 Aug 2015 17:49:14 +0000
Problems exporting a 60 minute film full HD AND problems burning to DVD studio pro - by: Stefan Marchand https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/23415-problems-exporting-a-60-minute-film-full-hd-and-problems-burning-to-dvd-studio-pro#67261 https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/23415-problems-exporting-a-60-minute-film-full-hd-and-problems-burning-to-dvd-studio-pro#67261
For a playable DVD, you could try Toast 's "Fit-to-DVD" feature. Commercial app that will take your 15GB file and compress it (visually) to fit on a 4.7GB single-layer DVD or a dual-layer DVD (double that size), though you have little control over quality. This is of course a shabbier alternative to setting up DVD Studio Pro properly, but can save you some time if you're pressed for time. (Not that it's quick, will still take a while depending on your computer)

As an editor, you're definitely going to need some amount of online storage for passing largish files around. It's not that expensive. I like DropBox and iCloud for trustworthiness (and pricing, but trust is #1), others like SugarSync, Google (Alphabet?) Drive, or Microsoft OneDrive.

Barring that, I think Frame.io might work as well, but you'd need to add the festival contact as a "collaborator," and they will need a login and password to download the file.

Good luck!
Edit: just noticed this was an older post. Hope you got it sorted out, and hopefully this info can help others who find this thread through a web search.]]>
Final Cut Pro 7 (FCP7) Mon, 10 Aug 2015 13:37:21 +0000
Final Cut Pro Upgrade from 6.06 to 7.03 (Final Cut Studio 2) upgrade:and best OSx for FCPro 7.03? - by: BenB https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/23803-final-cut-pro-upgrade-from-6-06-to-7-03-final-cut-studio-2-upgrade-and-best-osx-for-fcpro-7-03#66718 https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/23803-final-cut-pro-upgrade-from-6-06-to-7-03-final-cut-studio-2-upgrade-and-best-osx-for-fcpro-7-03#66718 Why not move to FCPX is you're upgrading your OS to a more modern one?
Why upgrade the OS if what you have works fine?
Why wipe the drive clean (issues, or "just because")?]]>
Final Cut Pro 7 (FCP7) Wed, 22 Jul 2015 12:42:00 +0000
**** FINAL CUT STUIO 3 **** - by: MsJustine https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/23667-final-cut-stuio-3#66017 https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/23667-final-cut-stuio-3#66017
Why anyone would want to use something that might not work on 2015 devices, or has an old stale outdated workflow..I mean Premiere CC, and FCP 7...is beyond me..]]>
Final Cut Pro 7 (FCP7) Tue, 30 Jun 2015 04:57:21 +0000
**** FCP7 Upgrade? **** - by: BenB https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/23673-fcp7-upgrade#66009 https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/23673-fcp7-upgrade#66009 Final Cut Pro 7 (FCP7) Tue, 30 Jun 2015 03:32:24 +0000 XDCAM MXF 4:2:2 to ProRes 4:4:4:4 - by: BenB https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/23654-xdcam-mxf-4-2-2-to-prores-4-4-4-4#65862 https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/23654-xdcam-mxf-4-2-2-to-prores-4-4-4-4#65862 Final Cut Pro 7 (FCP7) Thu, 25 Jun 2015 04:10:29 +0000 Log and transfer MTS file without the file structure? - by: lithe_lilith https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/23605-log-and-transfer-mts-file-without-the-file-structure#65551 https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/23605-log-and-transfer-mts-file-without-the-file-structure#65551 Final Cut Pro 7 (FCP7) Tue, 16 Jun 2015 13:47:40 +0000 Editing Feature - External Hard Drive - by: 7Presley https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/23561-editing-feature-external-hard-drive#65383 https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/23561-editing-feature-external-hard-drive#65383 Final Cut Pro 7 (FCP7) Tue, 09 Jun 2015 12:57:47 +0000 Compression and muted audio tracks and unused film clips! - by: BenB https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/23484-compression-and-muted-audio-tracks-and-unused-film-clips#65361 https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/23484-compression-and-muted-audio-tracks-and-unused-film-clips#65361 Final Cut Pro 7 (FCP7) Mon, 08 Jun 2015 23:29:58 +0000 fcp7 working off hardrive? - by: augustheat https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/23439-fcp7-working-off-hardrive#65098 https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/23439-fcp7-working-off-hardrive#65098
What I always got into the habit of doing with FCP7 was creating a folder on my HD and saving everything to that folder. Project file, render files, capture, etc.

Choose Final Cut Pro > System Settings, then click the Scratch Disks tab. Click set for the top option, and the bottom three, and set them to the folder on your external drive. Create your new project and save it to this same folder. Now it's all in one place on the external drive. Abbreviated instructions, but I think you get the general idea.

Gotta' say though, I was one of the last holdouts on FCPX. Once I switched, there was never any turning back... ;-)]]>
Final Cut Pro 7 (FCP7) Sun, 31 May 2015 02:53:28 +0000
Question about working with odd resolution - by: ericdemeij https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/23455-question-about-working-with-odd-resolution#64801 https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/23455-question-about-working-with-odd-resolution#64801 Final Cut Pro 7 (FCP7) Thu, 21 May 2015 18:38:42 +0000 Music Sync Issues - by: sunpacy https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/23454-music-sync-issues#64761 https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/23454-music-sync-issues#64761
I edit dance performance videos I use both sound the actual sound from the performance and the audio track of the music directly capture from the CD in AIFF format Imported to FCP.
Since I start to edit video in HD (at least is since I realize I have this problem but maybe no related) the music tracks are no in sync with the theatre sound. I sync the tracks and in the middle of the track the CD track is 00.00.00.02 late and get's worse at the end I have to cut the CD track when I notice the change and move it 02 earlier and if the track is long i have to repeat the cut several times. So start fine and loos synchronization. It never happen before. And nothing actually changed. Same venue same computer play the music in the theater same computer edit the video same cameras. Already happen in the last two productions I edited.
Does anyone have an answer?
FCP 7.0.3 Macbook pro 15" Mid 2102 2.6 GHz Intel Core i7 16 GB Ram 512 GB SSD]]>
Final Cut Pro 7 (FCP7) Wed, 20 May 2015 23:52:10 +0000
FCP7 record to P2 card error - by: BeeStew https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/23340-fcp7-record-to-p2-card-error#64136 https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/23340-fcp7-record-to-p2-card-error#64136 I need help with Print to Video function in Final cut 7. Most of a time I'm editing in FCP7, but problem is that FCP7 crash/freeze while record/print video (DVCPRO HD) to P2 recorder (Panasonic AG-HPG10 or 20). I have installed Os 10.10.3, but I remember that under the 10.9 works fine. I know that FCP7 is old and don't have support anymore. But I can't find this function in Final Cut X. I need to fix it because I record shots to P2 card with recorder and after than I use recorded P2 card in my Panasonic AJ-HPM200E.
Please help]]>
Final Cut Pro 7 (FCP7) Wed, 06 May 2015 16:45:59 +0000
FCP 6.0.6 and Mac OS 10.8.5 - by: MsJustine https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/23313-fcp-6-0-6-and-mac-os-10-8-5#64025 https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/23313-fcp-6-0-6-and-mac-os-10-8-5#64025 My experience is that I updated my retina macbook pro from Mzvericks to Yosemite, and all the software converted, including Final Cut Pro 7, and it is a tiny bit quicker, not much, but it seems faster, not that I use it much, I am now using X, so many benefits, I cannot justify having to go back, other than to keep memory fresh.]]> Final Cut Pro 7 (FCP7) Mon, 04 May 2015 15:52:50 +0000 FCP 6.0.6 and Mac OS 10.8.5 - by: Meanmrmustard https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/23310-fcp-6-0-6-and-mac-os-10-8-5#63989 https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/23310-fcp-6-0-6-and-mac-os-10-8-5#63989
Is it possible to run FCP 6.0.6 with Mac OS 10.8.5 or 10.7.x?

I am currently running FCP with Mac OS 10.6.8 with no problems, I am planning to upgrade to my OS but don't want to upset the apple cart.

Thanks
Mean Mr. Mustard]]>
Final Cut Pro 7 (FCP7) Sun, 03 May 2015 22:56:24 +0000
Using multiple masks on the same layer - by: alicemb https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/23249-using-multiple-masks-on-the-same-layer#63663 https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/23249-using-multiple-masks-on-the-same-layer#63663 Im working on a project in which I have to isolate two or more colors on the same layer while the rest is black and white. I already know how to isolate one color by using masking or the 3 way effect. However, I'm unable to add more masks so I can isolate two distinct colors on the same shot. Is there a way to do it on final cut pro 7? The only other I have is Motion... can I use that?]]> Final Cut Pro 7 (FCP7) Sun, 26 Apr 2015 21:31:44 +0000 Can't reinstall Final Cut Studio 3 - by: tungsteno https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/15987-can-t-reinstall-final-cut-studio-3#62707 https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/15987-can-t-reinstall-final-cut-studio-3#62707 www.fcp.co/forum/5-final-cut-pro-7-fcp7/...pgrading-stuff#62705 ]]> Final Cut Pro 7 (FCP7) Tue, 14 Apr 2015 16:43:49 +0000 Installng Final Cut Pro 7 on Yosemite 10.10.3 - Nightmare for the upgrading stuff - by: tungsteno https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/22928-installng-final-cut-pro-7-on-yosemite-10-10-3-nightmare-for-the-upgrading-stuff#62705 https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/22928-installng-final-cut-pro-7-on-yosemite-10-10-3-nightmare-for-the-upgrading-stuff#62705 Well, the only problem now is to upgrade it since the ProApplicationsUpdate2010-02 tells there's no need to upgrade, the version of FP7 is the 5.1
There's nothing out there for the stand alone upgrade so my only way should be to understand all what I need from the desktop to copy to the laptop.
If there's something else I don't know, which could be?
I should also make a research for the latest stuff I maybe have copied in some of my BD archive, but what the hell!
Apple could just leave them available, we are not playing, just working and this kind of decisions make me very unsatisfied. Take care, ciao.

update: found this article, maybe I could make a try on 10.10.3 Sidderke? www.fcp.co/forum/5-final-cut-pro-7-fcp7/...l-cut-studio-3#19880 ]]>
Final Cut Pro 7 (FCP7) Tue, 14 Apr 2015 16:30:24 +0000
Chroma Key Render Problems - by: BenB https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/22875-chroma-key-render-problems#62367 https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/22875-chroma-key-render-problems#62367 Delete all render files, delete preference files, re-launch, see if that helps. I think clearing out all of your render files may prove helpful.]]> Final Cut Pro 7 (FCP7) Wed, 08 Apr 2015 18:31:12 +0000 Any way to export the entire project, not just timeline? - by: fahnon https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/22776-any-way-to-export-the-entire-project-not-just-timeline#61714 https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/22776-any-way-to-export-the-entire-project-not-just-timeline#61714

BenB wrote: Yes, not everything than translate that easily. Be sure you have latest versions of everything. Be sure to review latest Xto7 instructions well. If you're having problems, I'd contact the developer directly, there're really nice folks.


Chalk this one up to me not using FCP7 in years. Turns out the problem was that there was a sequence already selected when I was exporting the XML. Once I de-selected it, I saw all the bins and sequences now appear. Thanks, Ben, for helping me figure this out.]]>
Final Cut Pro 7 (FCP7) Sun, 22 Mar 2015 20:09:07 +0000
First Time Post- GoPro Footage workflow - by: Remotruker https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/22779-first-time-post-gopro-footage-workflow#61692 https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/22779-first-time-post-gopro-footage-workflow#61692
Anyway I see you are a FCP user so I'm hoping you can lend an assist!

So here is my issue... As soon as i do anything to the video, the output looks totally grainy.

My workflow:
Mpegstreamclip to Apple Intermediate Codec:
www.dropbox.com/s/xr66g8hjbf8vgz4/MPEGSTREAMCLIP%20AIC.JPG?dl=0

Conform the frame rate to 29.97 with Cinema tools.
Create a new FCP project
Edit the sequence settings to:
www.dropbox.com/s/zl52xajbhmnoszm/Sequence%20Settings.JPG?dl=0

Then I'm using the Share function to H.264:
www.dropbox.com/s/b8b114ualv8hgxq/h.264%20settings.JPG?dl=0

If i do nothing to the video other drop into the timeline the video result is clean (hopefully youtube doesn't degrade this too much):
(look at the roofline at the very beginning of video)

But if i do something as simple as add a color corrector, the video looks like crap, all blocked out:
(look at the roofline at the very beginning of video)

I have tried so many different combinations, I can't remember them all, but they include: ProRes 422 and Apple Intermediate Codecs for initial transcoding the GoPro footage and also in the FCP exports (not just Share as mentioned above).



Any help you can offer would be greatly appreciated!

Final Cut Studio 3 with FCP7]]>
Final Cut Pro 7 (FCP7) Sun, 22 Mar 2015 04:08:01 +0000
Final Cut Pro Studio - 5.1 & Stero DVD creation - by: Snow1979 https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/22669-final-cut-pro-studio-5-1-stero-dvd-creation#61038 https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/22669-final-cut-pro-studio-5-1-stero-dvd-creation#61038 I have a final cut pro project for a live band video, I have 5.1 audio supplied direct from the sound deck currently on channels 1-6, plus audience audio from the camera on tracks 7-8.
Usually I would export as a self contained movie, import that video into compressor using the DVD best quality settings, then take that into DVD studio pro.
The client is asking for the DVD to have a menu with the option of playing the videos in 5.1 and stereo, and I'm completely lost on the workflow, I've done some searches on google and still unsure, can anyone help please, apologies if I'm asking a lot but step by step would be hugely appreciated.]]>
Final Cut Pro 7 (FCP7) Sun, 08 Mar 2015 18:36:00 +0000
file format - by: rankind1 https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/22627-file-format#60708 https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/22627-file-format#60708 Final Cut Pro 7 (FCP7) Mon, 02 Mar 2015 15:17:38 +0000 does there is a version of FCPX clone effect on FCP 7??? - by: augustheat https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/22202-does-there-is-a-version-of-fcpx-clone-effect-on-fcp-7#60618 https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/22202-does-there-is-a-version-of-fcpx-clone-effect-on-fcp-7#60618 Final Cut Pro 7 (FCP7) Sun, 01 Mar 2015 00:27:06 +0000 Opening a FCE project in FCP7 and then converting to XML. Looking for someone to do this. I will pay - by: augustheat https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/22570-opening-a-fce-project-in-fcp7-and-then-converting-to-xml-looking-for-someone-to-do-this-i-will-pay#60617 https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/22570-opening-a-fce-project-in-fcp7-and-then-converting-to-xml-looking-for-someone-to-do-this-i-will-pay#60617 Final Cut Pro 7 (FCP7) Sun, 01 Mar 2015 00:23:24 +0000 What is this transition ??? - by: BenB https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/21613-what-is-this-transition#60450 https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/21613-what-is-this-transition#60450 Final Cut Pro 7 (FCP7) Wed, 25 Feb 2015 18:07:40 +0000 Video/audio settings for Canon 6d - by: BenB https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/22492-video-audio-settings-for-canon-6d#60380 https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/22492-video-audio-settings-for-canon-6d#60380 Final Cut Pro 7 (FCP7) Tue, 24 Feb 2015 18:04:16 +0000 FCP can't see my external device. - by: BenB https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/22464-fcp-can-t-see-my-external-device#59692 https://mail.fcp.co/forum/5-final-cut-pro-7-fcp7/22464-fcp-can-t-see-my-external-device#59692 Final Cut Pro 7 (FCP7) Thu, 12 Feb 2015 16:48:45 +0000